Temporary Operation - Carrier 40VK S-8S-TST Series Owner's Manual

10

TEMPORARY OPERATION

■
TEMPORARY operation
This function is used to operate the unit temporarily in case you misplace the wireless remote controller
or its batteries are exhausted.
• Push the [RESET] button once (less than 3 seconds) to start the air conditioner.
• The last operation conducted with the wireless remote controller will be performed. (When wireless
remote controller is not used, models with the auto-changeover (cooling) function perform "A"
operation, and those without the function perform cooling operation (set temperature: 24 °C, fan:
HIGH).)
I cannot find the
remote controller
Continuous pressing of the [RESET] button for 10 seconds and above will start the forced cooling
operation.
(This will impose burden on the air conditioner. Do not perform this for the purposes other than test run.)
In this time all indicators of indoor unit go on.
A temporary
operation feature
is provided!
CAUTION
- 26 -
EN