Advertisement
Inspect all electrical connections, making sure they are properly attached to their specified connection points
before powering up machine.
1.A) Connect LED POWER HARNESS
(VE1017542) to controller and
route downward behind slide to
connect to OEM harness.
1.D) Connect COIN RETURN MOTOR
HARNESS (VE1017066) between
motor and controller.
1.G) Connect DEX HARNESS
(VE5817) to controller and route
to accessible location, or to
payment systems.
9
ATTACH HARNESSES
STEP 1. Attach Harnessing
CAUTION
!
1.B) Connect DISPLAY RIBBON
HARNESS (VE5834) to controller.
Board must
point up
1.E) Connect UCB MOTION SENSOR
HARNESS (VE1017101) to motion
sensor board. Route along side
channel as shown and connect to
Venture Board.
1.H) Connect VENTURE POWER HARNESS (VE1019772) to Venture board and
UCB.
VE1021148 - Media Panel Installation Manual
www.veii.com
1.C) Connect DOOR SWITCH HARNESS
(VE1019798) to door switch and
UCB.
1.F)
Connect MDB HARNESS
(VE1017070) to controller and route
to door payment systems.
Advertisement
