Advertisement
10
www.raider.bg
safety. The self-adjusting thermal shutdown will automatically turn off the power when the
limit temperature is exceeded.
Periodic storage and control
If the appliance is not used for a long time, it must be cleaned before returning. Store it in
a dry place and protect it from dust. When using the appliance again, check that the power
cord is not damaged. If you have any doubts about the conditions of the appliance, please
contact the service center. The appliance must be inspected at least once a year. Only
qualified personnel authorized by the manufacturer must carry out any repairs.
4 Troubleshooting
Problem
The motor operates while the appliance
does not heat.
The motor does not operate while the
heating
elements are hot.
The whole appliance does not operate.
Reduced air flow.
5. Environmental protection.
The unit is supplied in packaging to prevent its being damaged in transit. This packaging
is raw material and can therefore be reused or can be returned to the raw material system.
In view of environmental power, additional accessories and packaging must be subjected to
appropriate processing for reuse of the information contained in these materials.
Do not dispose of household waste power! Under the EU Directive 2012/19/EC on scrapped
electrical and electronic devices and to win recognition as a national power law, which can
be used more, must be collected separately and be subjected to appropriate processing for
recovery of contained therein scrap.
Cause
Thermostat has been damaged.
Switch has been damaged.
Heating element has been damaged.
self-resetting thermal cut-out has been
damaged
Motor has been damaged.
Fan has been stopped.
Switch has been damaged
Electric circuit open.
Switch has been damaged
Foul air duct.
Motor has been damaged
Solution
Replace the thermostat.
Replace the Switch
Replace the heating element.
Replace the self-resetting thermal cut-out
Replace the motor.
Unlock / clean the fan.
Replace the switch.
Check power supply connection.
Replace the switch.
Open the air duct.
Replace the motor.
Advertisement
