Fujitsu LPF-7200E User Manual page 14

Handling the Wireless Remote Control Unit
Wired Connection
When the wireless remote control unit is used at a distance from the projector or there is an obstacle between them, the infrared
signal from the remote control unit may not reach the projector. In this case, connect the wireless remote control unit to the
projector using the wired cable (optional).
Wireless Remote Control Unit Laser Warning Label
This wireless remote control unit is a Class 2 laser
product (max. output: 1mW; wave length: 650nm)
POWER MUTE
LASER
RGB VIDEO
MOUSE
PJ
MENU ENTER/R-MOUSE
ZOOM-PAN SOURCE VOLUME
CANCEL
AUTO STATUS
ZOOM FOCUS KEYSTONE
Warning
• The wireless remote control unit supplied with the projector emits a laser beam when the LASER button is pressed. Do not
stare directly into the beam or point the beam at anyone as this may result in loss of eyesight.
• Do not disassemble or modify the wireless remote control unit supplied with the projector as this may result in injury or failure.
En-14
WIRED REMOTE terminal
Caution label
LASER button
WIRED REMOTE terminal
AVOID EXPOSURE
-LASER
RADIATION IS EMITTED FROM THIS APERTURE
RAYONNEMENT LASER
NE PAS REGARDER DANS LE FAISCEAU
APPAREIL A LASER DE CLASSE2
EN60825-1 : 1994 + A11
LONGUEUR D'ONDE : 650nm
PUISSANCE MAXIMA : 1mW
CAUTION
VISIBLE LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH : 650nm MAX OUTPUT : 1mW
CLASS II LASER PRODUCT
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
EN60825 - 1 : 1994 + A11
WAVE LENGTH : 650nm MAX OUTPUT : 1mW
LASER-STRAHLUNG
NIGHT IN DEN STRAHL
BLICKEN LASER KLASS 2
EN60825-1 : 1994+A11
WELLENLÄNGE : 650nm
MAX AUSGANGSLEISTUNG : 1mW
Complies with 21 CFR 1040.10 and 1040.11
REMOTE CONTROL MODEL LPF-720RC
(continued)
Wired cable (optional: approx. 20m)
May-2000 Year and Month
of manufacture
Place of
Manufacturer : A
Made in Japan