Table of Contents
Advertisement
Setting Up
• There are 2 ways of setting the projector up: for regular projection and rear projection.
• By adjusting the zoom lens, you can choose the screen size as shown below.
Offset (O)
Screen Size Height (cm)
20
40
60
80
100
150
200
250
300
* Offset is the distance from the middle of the projection lens to the bottom edge of the screen.
Adjustment
• Adjust the height of the projector using the 2 adjusters on the front.
• If the relation between the position of the projector and the screen is not correct, the image will be distorted and blurred.
1
Lift the front of the projector while
pressing the two adjustment levers on
the side of the projector.
Adjustment lever
Adjuster
Note
• If you wish to lower the projector to its original position before storing it, press the adjustment levers and slowly lower the
projector. It can then be stored easily.
Projection distance (L)
Screen Size
Width (cm)
30
41
61
81
91
122
122
163
152
203
229
305
305
406
381
508
457
610
2
When the desired angle is reached,
release the adjustment levers to fix
the adjusters in that position.
Projection
Offset O (cm)
distance L (m)
0.7 – 0.9
2 – 29
1.4 – 1.9
3 – 58
2.1 – 2.8
5 – 87
2.9 – 3.8
6 – 116
3.6 – 4.7
8 – 145
5.4 – 7.1
11 – 217
7.3 – 9.4
15 – 290
9.1 – 11.8
19 – 362
10.9 – 14.1
23 – 434
3
Turn the adjusters for fine adjustment.
Up
Down
En-15
Advertisement
Table of Contents
