Table of Contents
Advertisement
Maintenance and Care
About the Air Filter
• If the air filter becomes blocked, the temperature inside the projector rises and the lamp fails to light, etc. Clean the air filter
about once every 6 months. Cleaning will be required more frequently if used in a particularly dusty environment.
• When the air filter becomes hard to clean, it is ready to be changed. Purchase a new air filter. (One filter is supplied with the
projector.)
Cleaning the Air Filter
1
Unplug the power cable from
the socket.
2
Remove the filter holder from
the projector.
Remove the filter holder from the bottom of the
projector.
3
Detach the air filter.
Filter holder
4
5
6
Air filter
Clean the air filter.
Use a vacuum cleaner to suck the dust from both
sides of the filter. If the filter is very dirty, wash in
cold or lukewarm water containing a neutral detergent
and dry away from direct sunlight.
Fit the air filter.
Fit the air filter back in the filter holder.
Fit the filter holder in the projec-
tor
Insert the catch on the filter holder in the bottom of
the projector and press until it clicks into place.
Take care not to
break the clasp on
the filter holder.
En-33
Advertisement
Table of Contents
