Emergency Hydraulic Bypass - NRC 30CS Operation And Maintenance Manual

3.5

Emergency hydraulic bypass

If you have trouble with the control panel on the left-hand side, you can use the manual override
control panel in the centre toolbox on the left-hand side. To use the hydraulic levers, remove the
protective cover over the levers. Another manual override control panel is inside the boom base
for the boom and winches levers.
The PTO must be engaged in order to use the emergency hydraulic bypass.
IMPORTANT: Never store any tools or other items inside the protective cover. The
hydraulic levers move when their corresponding electronic levers are
activated, and any tools or other items inside could restrict the movement of
the levers.
With the emergency hydraulic bypass, the boom can be rotated over the cab
without any limitations or electronic surveillance. Ensure that the boom and load
always remain at a safe distance from the cab, as nothing will prevent them from
hitting the cab.
FIGURE 18 — EMERGENCY HYDRAULIC BYPASS CONTROL PANEL
Composite Slider Wreckers – Operation and Maintenance
Models: 30CS-40CS-50CS
O p e r a t i o n a n d M a i n t e n a n c e
68
REV. 1
APRIL 12, 2023