Accident Or Breakdown Procedure; Electrical Failure - NRC 30CS Operation And Maintenance Manual

6

ACCIDENT OR BREAKDOWN PROCEDURE

This section explains what to do in case of an accident or equipment failure. Your goal is to
safely stabilize the equipment and either perform the necessary repairs on site or bring it to a
repair location.
Refer to this manual for all operation, maintenance and repair procedures. If in doubt, do not
hesitate to contact your distributor. See the list of Authorized distributors and service providers.
6.1

Electrical failure

In the event of an electrical failure, you can use the manual hydraulic levers to safely stabilize the
equipment.
The electrical failure must be repaired before performing other towing operations.
Contact your distributor to correct the problem.
Composite Slider Wreckers – Operation and Maintenance
Models: 30CS-40CS-50CS
O p e r a t i o n a n d M a i n t e n a n c e
135
REV. 1
APRIL 12, 2023