Safety; General; Safety Labels; Intended Use - NRC 30CS Operation And Maintenance Manual

2

SAFETY

2.1

General

Safety must be your top priority when operating and maintaining this equipment.
Improper use of this equipment is dangerous. Failure to comply with the safety
guidelines in this manual can cause accidents that may result in material damage,
injury or even death.
Should you find that this manual contains insufficient or unclear information about equipment
operation and maintenance, please contact your nearest NRC distributor for more details (see
the Authorized distributors and service providers section).
2.2

Safety labels

Ensure that all DANGER, WARNING, CAUTION and other labels and lifting capacity charts are
legible and properly placed. Clean and replace them as needed.
2.3

Intended use

NRC Industries equipment is intended for use only by trained and qualified operators who have
carefully read and understood the contents of this manual.
This product was designed to recover and tow vehicles that do not exceed its lift or tow ratings.
This manual explains how to properly use the towing equipment. However, you should also refer
to the towing recommendations from the vehicle manufacturer or a certified towing manual to
learn about recovery procedures for the vehicle to be towed.
This equipment was not designed for lifting persons and must never be used for
that purpose.
Composite Slider Wreckers – Operation and Maintenance
Models: 30CS-40CS-50CS
O p e r a t i o n a n d M a i n t e n a n c e
55
REV. 1
APRIL 12, 2023