Storage - NRC 30CS Operation And Maintenance Manual

7

STORAGE

Proper storage is important to prevent premature wear and tear on your machine. Ideally, it
should be stored in a dry, covered area.
When storing your wrecker:
1. Immobilize the machine in a dry and stable location.
2. As per Section
3. Position the parts so that the cylinders are fully retracted.
4. Lubricate any exposed cylinder rods.
5. Disconnect the electrical power supply to avoid depleting the batteries.
When taking your wrecker out of storage:
1. Clean and lubricate all parts, including the slider.
2. Replace the high-pressure and return filters on the hydraulic reservoir.
3. Check the oil level and pressure.
4. Connect the electrical power supply.
Composite Slider Wreckers – Operation and Maintenance
Models: 30CS-40CS-50CS
4.3 Lubrication, lubricate all parts, including the slider.
O p e r a t i o n a n d M a i n t e n a n c e
137
REV. 1
APRIL 12, 2023