Reset Button; Restoring The Network Settings To Default; Fully Restore The Factory Settings - Vimar by-me 01945 Installer Manual

Installation

1.1.2 RESET button

The RESET button allows you to do the following:
• Restore the network settings to default
• Fully restore the factory settings: network settings and configuration.

1.1.2.1 Restoring the network settings to default

This setting resets to factory defaults the following data on the network configuration of the web server.
IP Address: 192.168.0.110
Gateway: 192.168.0.4
Netmask: 255.255.255.0
ATTENTION: Once executed, the procedure cannot be undone.
The procedure involves the following steps:
1) Hold down the RESET button for 10 seconds. The LED "function" begins to flash, indicating it has entered into configuration mode.
2) Release the RESET button
3) Hold down the RESET button for 1 second (and in any case less than 4 seconds).
After a few seconds the LED stops flashing and the recovery process of the network parameters begins.

1.1.2.2 Fully restore the factory settings

This setting resets to factory defaults all configuration data of the web server (network parameters settings, system
data, user data, Energy Monitoring system history).
ATTENTION: Once executed, the procedure cannot be undone.
The procedure involves the following steps:
1) Hold down the RESET button for 10 seconds. The LED "function" begins to flash, indicating it has entered into configuration mode.
2) Release the RESET button
3) Hold down the RESET button for at least 5 seconds. After a few seconds the LED stops flashing and the recovery process of the configura-
tion parameters.
8