Updates - Vimar by-me 01945 Installer Manual

General settings
• PORT FORWARDING
This image shows the screen of the router with the port forwarding settings, where a rule for remote access to Vimar web server has been created
(the name of the "By-Web" rule is indicative and not binding):
- address of the web server (here the default address is used): 192.168.0.110
- opening of port 443 (required for access to the web server)

2.4 Updates

This page allows you to upgrade your version of the software inside the Web Server.
To do this, proceed as follows.
1. Access the configuration menu using the icon
The software Update window appears that displays the current software version of the Web Server.
2. Press the button "Choose File" (or "browse", depending on your browser) and select the installation package received, which must be present
in the PC used to access the Web Server
3. Go to the next screen by pressing "Confirm"
4. Select "Add File"
5. Press the "Update Software" button The installation procedures may require Several minutes.
6. At the end of the update process you will need to restart your Web Server by pressing "Restart Now".
7. Wait about 2 minutes to log back in to the Web Server (refresh the page in the browser).
After restart, the web server might request to load the XML system file.
NOTA: in case of occurrence of error messages on the screen, please contact customer support Vimar.
and select Setup -> Update
19