Table of Contents
Advertisement
General settings
Within the specific configuration pages of the various aspects of the Web Server, it is always available at the bottom a button panel containing one
or more of the following buttons:
BACK
Allows you to return to the previous page or the settings main menu
SCROLL UP
Allows you to scroll up the page, if it exceeds the available height
SCROLL DOWN
Allows you to scroll down the page, if it exceeds the available height
CONFIRM
Where available, allows you to save your changes on the page. On pages where it is not present, any changes are saved instantly
without the need of confirmation.
ADD / ENTER
Where available, allows - as appropriate - to create a new item in a list (e.g.: creation of a new environment), or add items related
to the current through the search engine (e.g. addition of devices the current environment )
The following paragraphs describe in particular the functions available in the "SETUP" section of GENERAL SETTINGS; other sections will be
explored in subsequent chapters.
2.2 Language
2.2.1 Setting the language at first start
When you first start the Web Server, and after every "restore to factory settings" operation a dialog opens for setting the language.
You can still change the language used by the Web Server later, from the appropriate menu described in the next chapter.
2.2.2 Setting the language from the menu
From this page you can only change the language of the Web Server. To access the Web Server language management, from the GENERAL
SETTINGS page select the SETUP menu and then select LANGUAGE. This page contains a drop down menu that lets you choose the language
of the Web Server, once selected your preferred language, you must press the confirm button on bottom right. After a second, the Web Server is
reloaded with the new language of choice. If, however, when choosing the language, you press the exit button on bottom left, the change is not
applied and you will return to the General Settings page.
2.3 Network
Through this page you can set network parameters of the Web Server; this operation is required for:
1. Editing web server network settings, if the factory settings are not compatible with the target LAN configuration.
2. Finishing the management process for web server SSL certificates, introduced by web server software version 1.12.
Important: This process requires an Internet connection for the web server. If an Internet connection is not available, the web server will
use the SSL certificate provided by previous software versions of the web server.
For such purpose, even if it is not required to edit the factory network settings of the web server, you should confirm network connection anyway,
by pressing the
button.
NOTE: this process must be done even after a software update of the web server (with network configuration already set) to software version
1.12 or later, starting from a version earlier than 1.12.
13
Advertisement
Table of Contents
