Database - Vimar by-me 01945 Installer Manual

General settings

2.5 Database

This page allows you to operate on the Web Server database, which contains the configuration of the supervising project; you can do the following
by selecting the corresponding item from the list:
EXPORT
IMPORT
RESTORE
Note: The operations described in the above table do not influence the Energy Monitoring data.
After selecting the desired item, use the ENTER button available from the button panel to start the procedure, which can take several minutes, during
which it is important neither to perform any other operation on the Web Server, nor close the browser window.
20
It allows you to export a backup of the database and save it on your PC in order to load it later on the same or
a different Web Server.
It allows you to load a backup of the database previously saved on your PC from the same or a different Web
Server.
It allows you to restore the Web Server database to its defaults.
Note: this does not restore the original IP address of the Web Server.