Fortin INT-SL Installation Manual

INT-SL
Copyright © 2007, FORTIN AUTO RADIO INC
DATA INTERFACE MODULE SELF-LEARNING FOR SECURITY SYSTEM AND / OR REMOTE STARTER.
WIRING / CONNECTION GUIDE
LED
START HERE
1
Make the connections of the INT-SL to the
vehicle:
Connector 1 (Black):
1.A
Determine the type of installation:
INSTALLATION WITH
INSTALLATION WITHOUT
Connector 2 (White):
(I) Locate the wiring type for the vehicle on the
1.B
VEHICLE FIT GUIDE (P.2)
(II) Make the connections associated with the vehicle in the
WIRING SCHEMATIC CONFIGURATION (P.3)
2
3
4
INSTALLATION WITH DATA-LINK
Plan 1
INSTALLATION WITHOUT DATA-LINK
Plan 2
Cut off one plug of the
2
Data-Link connector,
connect the red wire
to +12V and the black 1
wire to ground.
WEB
UPDATE
COMPATIBLE
ALL RIGHTS RESERVED
Lock
Unlock Driver 1
2
Ignition
(-) While running
Door trigger
Data OBD2
Bypass PK
3 (Type 3 only)
12V Battery (+) 1
Ground (-)
Data-Link
Data-Link
Connect wire to vehicle
INSTALLATION AND PROGRAMMATION INSTRUCTIONS
DATA-LINK ( See plan 1, below
DATA-LINK (See plan 2, below)
Press and hold the programming
button. Plug in the connector 1
in the INT-SL interface.
The LED will turn on, indicating
the beginning of programming.
Plug the connector 2 into the
INT-SL interface.
WARNING: Connector 2 can be easily
plugged in backwards.
Starter or alarm
Data Link Port
2
1
Starter or alarm
Red +12V
Black
Lt. Blue/Black
Lt. Blue
White
White/
Pink Pink/Black
Green
Blue
Orange
Orange/Black
~
Purple Purple/White or Purple/Black
Yellow
Yellow/Black
WARNING: Connector 2 can be easily plugged in backwards.
Red
Black
Blue
White
Connect wire to Remote-Starter/Alarm
5
)
6
7
8
9
10
Neither the manufacturer or distributor of
this module is responsible of damages of
any kind indirectly or directly caused by this
module, except for the replacement of this
module in case of manufacturing defects.
This module must be install by qualified
technician. This instruction guide may
V
change without notice. isit www.ifar.ca to
get latest version.
Technical support:
TEL: 514-255-HELP (4357)
FAX: 514-255-1367
Web: www.ifar.ca
P.1
INSTALLATION GUIDE
Made in Canada - Rev. K - 17 / 03 / 2009
W e b s i t e : h t t p : / / w w w . i f a r . c a
See wiring schematic configuration
Black Unlock Driver 2
(Type 3 only)
OUTPUT
While holding the programming
button, turn the key to the ignition
position.
The LED will flash rapidly.
Release the programming button.
Chrysler vehicle go step 9
Start the vehicle with the key.
The LED will turn off.
Turn the key OFF.
The interface is programmed.
7 7 0 3 5 0 0 0 1 2 6
Trunk
Parking light
Futur Input
Tach
Data BCM
Bypass P 3 K
Manufactured under US patent No.:
5,719,551 6,011,460 B1
6,243,004 B1 6,249,216 B1
6,275,147 B1 6,529,124 B2
6,696,927 B2 6,756,885
B1 6,756,886 B2 6,771,167 B1
Canadian Patent No.:
2,320,248 2,415,023
Européen Patent No.:
1,053,128
INPUT
1