Fortin EVO ONE 20200408 Installation Manual

ONE
REGULAR INSTALLATION
PUSH
START
VEHICLE
AUDI
A3 / S3 PTS PTS
RS3
PTS
MODEL: EVO-ONE
DATE:02/2019
FORTIN.CA
SN: 000000 00000 2019
MADE IN CANADA
© 2018 ALL RIGHTS RESERVED
NOTES
1 KEY REQUIRED FOR THE
INSTALLATION
2x diodes 1A
1x Relay
1x fuse
MANDATORY INSTALL
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
* HOOD
MUST BE INSTALLED IF THE VEHICLE CAN BE
PIN
1 / 8
Page
YEARS
2019-2020 • • •
2019-2020 • • •
QR CODE
COMPATIBLE
ON THE LABEL
MODULE
MANUFACTURED
REQUIRED:
AFTER: 2019
CODE QR
Program bypass option
IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:
Program bypass option:
Program bypass option
(If equiped with OEM
A11
REV.: 20200408 REV.: 20200408
Vehicle functions supported in this diagram (functional if equipped)
Comfort Group
• • • • •
• • • • •
REMOTE STARTER
FIRMWARE VERSION
FIRMWARE VERSION
61[11]
SUR
VW MINIMUM
UNIT OPTION
A11
OFF
UNIT OPTION
OPTION UNITE
C1
D6
D2
alarm):
Notice: the installation of safety
elements are mandatory. The hood pin
SECURITY STICKER
OFF
and the sticker are essential security
elements and must be installed.
WARNING
ATTENTION
Included
Guide # 92361
ADDENDUM - SUGGESTED WIRING
AUX.1
• • • • •
• • • • •
To add the firmware version and
the options, use the FLASH
LINK UPDATER or FLASH LINK
MOBILE tool, sold separately.
1.25
MINIMUM
DESCRIPTION
Hood trigger (Output Status).
DESCRIPTION
OEM Remote status (Lock/Unlock)
monitoring
Push-to-Start
Unlock before / Lock after (Disarm OEM
alarm)
THIS MODULE MUST BE INSTALLED BY A
QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT
DAMAGE TO THE VEHICLE.
CONFIGURATION
• • • •
• • • •