XMOS VocalFusion XVF3510 User Manual page 21

The following steps show how to install the libusb driver using Zadig:
}
Connect the XVF3510 board to the host PC using a USB cable.
}
Open Zadig and select XMOS Control (Interface 3) from the list of devices. If the device is not
present, ensure Options -> List All Devices is checked.
}
Select libusb-win32 from the list of drivers.
}
Click Reinstall Driver.
Once installed the vfctrl_usb utility is ready to use. The following steps explain how to use the host
control utility.
1. Copy the host directory of the Firmware Release Pack to the host platform.
2. Navigate, from a terminal window, to the copied host directory and execute one of the
following commands, depending on the specific platform, to list the supported commands
and the general form of the utility usage.
For Linux hosts use:
.\Linux\bin\vfctrl_usb --help
For macOS hosts:
.\MAC\bin\vfctrl_usb --help
For Windows hosts:
.\WIN32\bin\vfctrl_usb --help
XM-014232-PC 21