Table of Contents
Advertisement
36
www.electrolux.com
Installing anti-tilting device
If the height of the counter is 820 mm or lower, you cannot install the anti-
tilting device.
16.6 Preparation and assembly of the door
~10mm
Remove the screws of the top cover on the
rear of the appliance and install the anti-tilting
device as shown in the drawing.
Adjust the anti-tilting device so that the
distance from the counter is 10mm. Loosen
the nut counterclockwise with a 3mm wrench.
Adjust the height and turn the nut clockwise
to fix it.
The appliance is originally pre set for the
assembly of a door opening from right to left.
Advertisement
Table of Contents
