Electrolux EWX14742W User Manual page 10

10 www.electrolux.com
C Digit area:
• Duration of the selected programme
After you select a programme, the duration is displayed in hours and mi‐
nutes (for example
basis of the maximum recommended load for each type of fabric. After the
programme start, the time remaining is updated every minute.
• Selected drying time
After you select the drying programme, the drying time is displayed in mi‐
nutes or in hours and minutes. After the programme start, the time remaining
is updated every minute.
• Delayed start
The selected delay appears for few seconds, then the display shows the du‐
ration of the selected programme again.
• Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
example
• Incorrect option selection
If you set an option not compatible with the selected wash programme, the
message
Start/Pause starts flashing.
• End of programme
When the programme has finished, the flashing value
The indicator of Start/Pause button goes out.
If the indicator
D Washing programme phase indicators:
By selecting the wash programme, the washing programme indicators corre‐
sponding to the various phases making up the programme are shown.
After you have pressed the Start/Pause button, only the indicator of the running
phase stays on.
(see chapter «Troubleshooting»).
shows up for a few seconds and the red indicator of button
goes off, you can open the door.
Wash
Rinses
Drain
Spin
Drying
). The duration is calculated automatically on the
is displayed.