Table of Contents
Advertisement
Recording a CD by specif ying t rack
order (cont inued)
8
Press CD SYNC.
Deck B stands by to record in the
direction of the indication on hH (the
right indication lights to record on the
forward side and the left indicator lights
to record on the reverse side). The CD
player stands by for playback.
9
Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
10
Press REC PAUSE.
Recording starts.
To st op recording
Press x.
To check t he order
Press CHECK on the remote repeatedly. After
the last track, "CHECK END" appears.
To cancel Program Edit
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
28
Downloaded from:
https://www.usersmanualguide.com/
Select ing t ape lengt h
aut om at ically
—Tape Select Edit
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing over 20
tracks.
1
Place a CD.
2
Press CD.
3
Press EDIT once, so that "EDIT"
flashes.
The required tape length for the
currently selected CD appears, followed
by the total playing time for side A and
side B respectively.
Not e
You cannot use this function after programming.
In order to use this function, you must first cancel
the program by pressing PLAY MODE repeatedly
until "PROGRAM" or "SHUFFLE" disappears from
the display.
Advertisement
Table of Contents
