Power On Password - Acer V35N User Manual

You can either change the existing Setup
password or remove it by selecting
Refer to the previous section for the
procedure.
2.6.5

Power On Password

The Power On Password secures your system against unauthorized
use. Once you set this password, you have to type it whenever you
boot the system. To set this password, enter the BIOS utility, select
System Security, then highlight the Power On Password parameter.
Follow the same procedure as in setting the Setup password.
Make sure to set JP1 to 1-2 to enable the
Power On password.
BIOS Utility
None .
2-31