Table of Contents
Advertisement
1.9
Post-installation Instructions
Observe the following after installing a system component:
1.
See to it that the components are installed according to the step-by-step
instructions in their respective sections.
2.
Make sure you have set all the required jumpers. See section 1.5 for the
correct jumper settings.
3.
Replace any expansion boards or peripherals that you removed earlier.
4.
Replace the system cover.
5.
Connect the necessary cables and turn on the system.
1.10
Error Messages
In the event that you receive an error message, do not continue using the
computer. Note the message and take corrective action immediately. This
section describes the different types of error messages and suggests
corrective measures.
There are two general types of error messages:
·
Software
·
System
1.10.1
Software Error Messages
Software error messages are returned by your operating system or
application. These messages typically appear after you boot the operating
system or when you run your applications. If you receive this type of
message, consult your application or operating system manual for help.
1.10.2
System Error Messages
A system error message indicates a problem with the computer itself. These
messages normally appear during the power-on self-test, before the operating
System Board
1-17
Advertisement
Chapters
Table of Contents
