Post-Installation Instructions - Acer V58 User Manual

Do not attempt the procedures described in
the following sections unless you are a
qualified service technician.
1.5.3

Post-installation Instructions

Observe the following after installing a system component:
1. See to it that the components are installed according to the step-
by-step instructions in their respective sections.
2. Make sure you have set all the required jumpers. See section
1.4.2. for the correct jumper settings.
3. Replace any expansion boards or peripherals that you removed
earlier.
4. Replace the system cover.
5. Connect the necessary cables and turn on the system.
1-10 User's Guide