KTM 150 EXC TPI 2022 Owner's Manual page 140

18 SERVICE WORK ON THE ENGINE
138
–
Plug in wake-up connector
the diagnostics connector
The combination instrument lighting is activated.
Info
The connector is included as part of the motorcy-
cle's separate enclosure.
–
Wait for at least five seconds.
–
Release the fixing means from the throttle grip.
The oil pump is timed.
Info
The oil pump is actuated at various speeds.
The procedure is clearly audible.
–
Wait until you can no longer hear the oil pump operating.
–
Disconnect the wake-up connector from the diagnostics
connector.
V02171-10
–
Check whether air bubbles are visible in the hose
» If air bubbles are visible:
–
Repeat the entire procedure until air bubbles are
no longer visible.
–
Mount the diagnostics connector on the holder.
–
Mount the EFI control unit on the rubber lugs.
S03513-10
(150 XC‑W TPI US)
–
Pull the EFI control unit
and hang to the side.
–
Remove protection cap
S03510-10
4
for priming the oil pump to
5
.
6
1
upward off the rubber plugs
2
of the diagnostics connector.
.