Adjust The Sliders - Silhouette Cameo Pro User Manual

Adjust the Sliders

By adjusting the sliders on the main roller shaft, the Silhouette machine can accommodate the following media sizes:
letter, A4, 12 inches, A3, 13 inches, 15 inches, 20 inches, and 24 inches.
A4, Letter (198–222mm)
A3, 12 inches (281–305mm)
Locate the release lever on the right side and turn it clockwise.
Pinch the edges of the roller body, or the biggest adjustment lever, on the right-
hand side of the roller bar, with two fingers. Move the roller body right or left in
the desired position.
Note: For the most effective grip, line up the center notch of the roller body with the
arrows below the notch on the Silhouette machine.
There are two other mechanisms in the middle of the roller bar that can be moved
to aid in gripping the material more.
Once you have adjusted the end lever to the desired position, you may adjust
those other mechanisms and move them either further apart or closer together as
necessary. It is recommended that you space them out evenly depending on the
width of the material you are loading.
13 inches (319–343mm)
15 inches (359–382mm)
20 inches (496–520mm)
Silhouette Cameo® 4 Pro User Manual
24 inches (598–621mm)
22