Efco SwapLoader SL-400 Parts And Operation Manual page 78

Table of Contents

Advertisement

CHANGING HOOK HEIGHTS
61-3/4" to 54" Jib Height Adjustment Procedure:
CAUTION:
The following is the recommended procedure for changing hook
heights on the adjustable jib from 61-3/4" to 54" heights. Failure to
follow and adhere to this procedure may result in possible property
damage and/or personal injury.
WARNING:
Make sure work area is clear of people and obstacles prior to
changing the hook height on the adjustable
1.
With the telescopic arm in full load/unload position (as shown); remove the hitch pin
from the lock pin. Then pull the lock pin loose from the jib arm.
2.
Tilt the telescopic arm toward the cab (left control lever forward). See Fig. A (Pg. 3-1).
SL-400.OPE
07/2009
Lock pin secured
with hitch pin
3-7

Advertisement

Table of Contents
loading

Table of Contents