Operating The Stabilizer - Efco SwapLoader SL-400 Parts And Operation Manual

Table of Contents

Advertisement

WARNING:
(CONTINUED)
3.

OPERATING THE STABILIZER

If loading or unloading a heavy container that would cause the front end of the truck to lift off
the ground, then a stabilizer should be utilized if the unit is equipped with one.
When Loading a Container the stabilizer should be lowered between steps 3 & 4, while when
Placing the Container on the Ground the stabilizer should be lowered between steps 1 &2 (see
the previous operating instructions on pages 3-1 to 3-3).
To lower the stabilizer, push forward on the left control lever until the roller is all the way down.
When finished with loading or unloading the container the stabilizer roller should be raised prior
to disengaging the P.T.O. To raise the stabilizer, push backward on the left control lever until
the roller is all the way up.
SL-400.OPE
07/2009
DON'T DRIVE WITH THE HOIST IN THE
DUMP POSITION OR WITH THE HOOK
TILTED BACK.
FRONT
LOWER
LOWER/LOAD
LIFT
RAISE
RAISE/UNLOAD
EXTEND
JIB
RETRACT
3-4

Advertisement

Table of Contents
loading

Table of Contents