Telemarketing Call Block - Panasonic KX-TGF973 Operating Instructions Manual

Enhanced Call Block
Erasing all entries
Handset / Base unit
1
MMENUN#794
2
MERASEN a MbN: "Yes" a MSELECTN
3
MbN: "Yes" a MSELECTN
4
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Greeting message for automated
call block
Handset
When the unit answers a call, a greeting
message is played to the caller.
You can use either:
– your own greeting message and
pre-recorded greeting message
– pre-recorded greeting message
Recording a greeting message for
automated call block
Using this feature, the unit can play your own
greeting message and pre-recorded greeting
message.
Example of your own greeting message:
"Hi, you have reached xxxxxxx (Name)."
"Thank you for your calling, You have reached
xxxxxxx (Name)."
"Hi, you have reached the xxxx (Name)
residence."
1
MMENUN#791
2
MbN: "Yes" a MSELECTN
3
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
Press MSTOPN to stop recording.
5
The unit will play the recorded greeting
message for automated call block. a
MOFFN
For assistance, please visit http://shop.panasonic.com/support
44
KX-TGF97xUSA(en-us)_0928_ver121.pdf 44
Resetting to the pre-recorded
greeting message for automated call
block
This procedure will erase your greeting
message for automated call block and reset to
the pre-recorded one.
1
MMENUN#793
2
MYESN a MOFFN
Playing back the greeting message
for automated call block
1
MMENUN#792
2
To exit, press MOFFN.

Telemarketing call block

In addition to Automated call block (page 42),
you can use Telemarketing call block to
further screen calls to stop telemarketer calls
from getting through.
Using this feature, you can ask callers to say
their names, and after checking the names,
you can decide whether to answer the calls or
not.
Note:
R This feature is only available for landline
calls.
R While screening calls, the call waiting
feature is unavailable (page 26, page 33).
R Telemarketing call block guidance and
caller name announcement cannot be
heard using a Bluetooth headset.
Operating telemarketing call
block
Handset
1
During a landline call, lift the handset and
then press MTELE.BLK.N.
R The unit prompts callers to say their
names.
2
To answer the call:
Press M N or MZN.
To block the call:
9/28/2022 11:24:40 AM