Table of Contents
Advertisement
Programming
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Do not disturb mode
Do not disturb mode allows you to select a
period of time during which the handset will
not ring for outside calls. This feature is useful
for time periods when you do not want to be
disturbed, for example, while sleeping. Do not
disturb mode can be set for each handset.
Using the phonebook's category feature
(page 20), you can also select categories of
callers whose calls override do not disturb
mode and ring the handset (Caller ID
subscribers only).
Important:
R Make sure the unit's date and time setting
is correct (page 14).
R We recommend turning the base unit ringer
off (page 25) in addition to turning do not
disturb mode on. (KX-TGD320 series:
page 3)
R If you have set the alarm, the alarm sounds
even if do not disturb mode is turned on.
Turning do not disturb mode on/off
1
M
N#238
2
MbN: Select the desired setting. a MOKN
R If you select "Off", press M
3
Enter the desired hour and minute you
wish to start this feature. a MOKN
4
Enter the desired hour and minute you
wish to end this feature. a MOKN a
M
N
Changing the start and end time
1
M
N#237
2
Continue from step 3, "Turning do not
disturb mode on/off", page 30.
30
Setting the ring delay
This setting allows the handset to ring during
do not disturb mode if the caller waits long
enough. After the selected amount of time
passes, the handset rings. If you select "No
Ringing", the handset never rings during do
not disturb mode.
1
M
2
MbN: Select the desired setting. a MOKN
a M
Note:
R When the answering system answers the
call, this feature does not work.
(KX-TGD320 series: page 3)
Selecting categories to bypass do
not disturb mode
1
M
2
MbN: Select the desired categories. a
M N
R " " is displayed next to the selected
R To cancel the selected category:
3
MOKN a M
Nuisance call block
N to exit.
This feature blocks calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (50 max.).
– "Single Number": The unit blocks calls
from specific phone numbers.
– "Range of Numbers": The unit blocks
calls that begin with a number stored in the
call block list, such as a toll-free phone
number prefix or certain area codes.
You can also set the unit to block calls that
have no phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller's phone number matches an entry in the
N#239
N
N#241
category numbers.
MbN Select the category. a Press M N
again. " " disappears.
N
Advertisement
Table of Contents
