Pci Expansion Slots; Expansion Slots And Riser Cards - Supermicro SuperServer SYS-620TP-HC8TR User Manual

3.9 PCI Expansion Slots

Each node offers options for riser cards that provide custom PCIe capabilities—one right-
facing WIO riser card, and one left-facing WIO card.

Expansion Slots and Riser Cards

This system offers options for riser cards that provide custom PCIe 4.0 capabilities.
Position* Part Number
Right side
RSC-PR-6-X2
(SXB3)
Left side
RSC-P-6G4
(SXB4)
*Position in the node tray when looking from the back of the server.
Installing Expansion Cards
(Figure on next page)
1. Use the control panel to power down the computing node, and pull the node drawer out
of the chassis.
2. Open the PCI slot clip in the rear of the node drawer and remove the PCI slot shield.
3. If the riser card is not already installed, push it into the motherboard slot.
4. Slide the expansion card into the riser card slot while fitting the expansion card shield
into the opening in the rear of the node drawer.
5. Close the PCI slot clip to secure the expansion card shield.
6. Secure the riser card screw.
7. Return the node drawer and power-up.
Chapter 3: Maintenance and Component Installation
2
Figure 3-17. Expansion Card Chassis Slots
PCIe Riser Cards
Slot Description
620TP-HC8TR: Add-on card AOC-S3808L-L8iT
1
620TP-HC9TR: Add-on card AOC-S3908L-H8IR-16DD-P
2 x16 low profile (CPU2)
59
1