Sony Handycam DCR-PC330 Application Manual page 15

9
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
10
Touch [P-MENU], [MENU] and [USB-
PLY/EDT], then touch to select [STD-
USB].
11
Connect your camcorder to the
computer via the USB cable (p. 14).
[USB MODE] appears on the LCD screen
of your camcorder and the computer starts
to recognize the camcorder.
It may take some time for the computer to
recognize the camcorder when you connect
the USB cable for the first time.
For Windows XP
If [Found New Hardware Wizard] appears,
click [Continue Anyway] and complete the
installation.
To disconnect the USB cable
For Windows 2000/Windows Me/
Windows XP
If [USB MODE] appears on the LCD screen,
follow the procedure below to disconnect the
USB cable.
1
Click the [Unplug or Eject Hardware]
icon on the task tray.
Click this icon.
2
Click [Unplug or eject hardware]
([Safely remove Sony Camcorder] in
Windows XP).
3
4
If [USB MODE] does not appear on the LCD
screen, do only step 4 above.
For Windows 98/Windows 98SE
Do only step 4 above.
Recommended connection
Connect as shown in the following illustrations
to operate the camcorder correctly.
• Connect the camcorder to a computer via the
task tray
Click here.
Click [OK].
Disconnect the USB cable from the
camcorder and computer.
USB cable (supplied). Make sure no other
USB devices are connected to the computer.
Connecting to a Windows computer
,continued
15