When You Have Problems Operating The Machine - quadient HD-MB50D User Manual

When You Have Problems Operating the
Machine
Problem
The indicator lamp remains
lit and the machine does not
enter Sleep mode even
though [Energy Saver] was
pressed.
The display is turned off.
Nothing happens when the
display panel is touched.
The power turns off
automatically.
The user code entry screen is
displayed.
The Authentication screen
appears.
An error message is still
displayed, even if misfed
paper is removed.
An error message is still
displayed, even if the
indicated cover is closed.
Images are printed on the
reverse side of the paper.
Cause
In some cases, the machine
does not enter Sleep mode
when [Energy Saver] is
pressed.
The machine is in Sleep
mode.
The power is turned off.
The Weekly Timer setting is
set to [Main Power Off].
Users are restricted by User
Code Authentication.
User Authentication is set.
Paper is still jammed in the
tray.
One or more of the covers
that are not indicated are
still open.
You may have loaded the
paper incorrectly.

When You Have Problems Operating the Machine

Solution
Before you press [Energy Saver],
check that Sleep mode can be
enabled. For details about enabling
Sleep mode, see "Saving Energy",
Operating Instructions.
Touch the display panel or open the
front cover or right cover.
Make sure the main power indicator is
off, and then turn on the power.
Change the Weekly Timer setting. For
details about the Weekly Timer setting,
see "Timer Settings", Operating
Instructions.
For details about how to log in when
User Code Authentication is enabled,
see "When the Authentication Screen is
Displayed", Operating Instructions.
See "When the Authentication Screen
is Displayed", Operating Instructions.
Remove the jammed paper by
following the procedures displayed on
the control panel. For details about
removing jammed paper, see
page 92 "Removing Jammed Paper".
Close all the covers of the machine.
Load the paper correctly. For details
about loading paper, see page 43
"Loading Paper".
69