Table of Contents
Advertisement
Electrical specifications
Video input
• Digital video signal for each differential line
signals
• mDP/HDMI/Thunderbolt
Input voltage/
100-240 VAC / 50 or 60 Hz ± 3 Hz / 4.6 A (maximum)
frequency/
current
Inrush current 120 V: 42 A (Max.)
240 V: 80 A (Max.)
Inrush current is measured at an ambient temperature of 0°C
Power
0.3 W (Off Mode)
Consumption
0.5 W (Standby Mode)
2.0 W (Networked standby Mode)
68.1 W (On Mode)
420 W (Max)
69.62 W (P
231.11 kWh (TEC)
As defined in EU 2019/2021 and EU 2019/2013.
1
Max brightness and contrast setting with maximum power loading on all USB ports.
2
P
: Power consumption of On Mode measured with reference to Energy Star test
3
on
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
This document is informational only and reflects laboratory performance. Your prod-
uct may perform differently, depending on the software, components, and peripherals
you ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
Per differential line at 100 ohm impedance
1
1
2
)
3
on
3
4 signal input support
TM
1
1
About your monitor
|
21
Advertisement
Table of Contents
