Page 1
USE AND CARE GUIDE QUIET SUMP PUMP CHECK VALVE CV-150...
Page 2
TOOLS REQUIRED: Safety Goggles Hacksaw or PVC Cutter Flathead Screwdriver Tape Measure SAFETY INFORMATION: WARNING ALWAYS DISCONNECT POWER TO YOUR PUMP AND RELEASE PRESSURE BEFORE SERVICING.
Page 3
INSTALLATION: Note: For use in residential sump pump applications only. MAXIMUM 12 PSI. 1. Unplug your pump. 2. Disconnect the pump’s discharge pipe from below your existing check valve. 3. Drain the discharge pipe above the check valve into your basin or a bucket and remove the old check valve.
Page 4
(the “Warranty Period”). During the warranty period, PumpSpy will repair or replace at no cost to you, to correct such defects in products found upon examination by PumpSpy to be defective in materials or workmanship.
Need help?
Do you have a question about the CV-150 and is the answer not in the manual?
Questions and answers