Related Manuals for CYBEX Big Iron 19061
Summary of Contents for CYBEX Big Iron 19061
- Page 1 Big Iron 19061/19071 Combo Rack Owner's Manual Strength Systems Part Number 19061-999-4 C www.cybexintl.com...
-
Page 2: Table Of Contents
Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc. makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes. -
Page 3: Safety Guidelines And Practices
• Fasteners must have a minimum of 500 lbs. tensile capacity. Cybex recommends .3/8” grade 2 bolts or better. A minimum pull force of 220 lbs/100 kgs is required for each anchor position. -
Page 4: User Safety Precautions
• DO NOT pin weights on selectorized equipment in an elevated position or use the machine if found in this position • DO NOT increase weight resistance on equipment by any means other than those provided by Cybex. • DO NOT wear loose or dangling clothing or jewelry while using equipment. Stay clear of moving parts. -
Page 5: Warnings And Cautions
Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C Warnings and Cautions Warning labels indicate a potentially hazardous situation that could result in serious injury or death if the precautions are not observed. Caution labels indicate a potentially hazardous situation that could result in serious injury or damage to machine if the precautions are not observed. -
Page 6: Label Placement
Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C Label Placement The following diagram shows where each label is located. Description DE000001-X 16240-329-X Page 6 of 19... -
Page 7: Assembly
Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C Assembly Machine Specifications Total Weight and Size 19061 Combo Rack Weight Machine Dimensions at Rest Machine Dimensions at Use 1065 Lbs 91” W × 111” L × 104.5” H Same 484 Kg 177 cm W ×... -
Page 8: Environment
Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by 48 inches and be served by an accessible route for at least one of each type of exercise equipment. If the clear space is enclosed on three sides (e.g., by walls or the equipment itself), the clear space must... - Page 9 Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C 2. Remove items from pallet in the order shown on the following diagram. Carefully handle parts to prevent damage to paint or frame. Assemble rack 1. Assemble Rack in area it will be used.
- Page 10 Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C 2. Attach two Vertical Tubes to Bottom Tube. Note position of Vertical Tubes. 3. Attach side cross tube. Description Side cross tube Screw .375-16 x .75 Vertical tube right Vertical tube left Bottom tube 4.
- Page 11 Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C 7. Using a step ladder, carefully attach both Upper Handle to sides. Securely tighten all screws to 450 - 500 lb-in. Description Insert, black Screw .375-16 x .75 Upper handle bar...
- Page 12 • Fasteners must have a minimum of 500 lbs. tensile capacity. Cybex recommends .3/8” grade 2 bolts or better. A minimum pull force of 220 lbs/100 kgs is required for each anchor position.
-
Page 13: Exercise
Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C Exercise Intended Use The intended commercial use of this machine is to aid exercise and improve general physical fitness. Instructions Before you workout Prior to starting a training program, get a complete physical exam to make sure your physician agrees that you are ready. -
Page 14: Maintenance
Do Not inhale or swallow any cleaning product. Protect surrounding area/clothing from exposure. Use in well ventilated area. Follow all product manufacturer’s warnings. Cybex and its vendors cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products. - Page 15 Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C Then 1. Prepare a solution of 10% household bleach (sodium hypochlorite) and 90% water. Dampen a soft white cloth in the solution. 2. Rub gently on the stained area. 3. Dampen a clean soft cloth in water and rinse area.
-
Page 16: Weekly Procedures
Big Iron 19061/19071 Combo Rack Part Number 19061-999-4 C To Minimize Fine or Hairline Scratches: Mild automotive polish applied and removed with a soft clean cloth will help fill scratches. Suggested Polishes: • Johnson Paste Wax • Mirror Glaze #10 Plastic Polish (by Mirror Bright Polish Co.) •... -
Page 17: Customer Service
Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. Email address internationaltechhelp@cybexintl.com... -
Page 18: Return Material Authorization (Rma)
Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper RMA and an Automated Return Service (ARS) label. - Page 20 10 Trotter Drive, Medway, MA 02053 • 888-462-9239 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com...
Need help?
Do you have a question about the Big Iron 19061 and is the answer not in the manual?
Questions and answers