SystemRoMedic StandingVest Quick Start Manual

StandingVest

Manual - English

SystemRoMedic

Max load: 300kg/660lbs

StandingVest is specially designed for lifting with a standing shell. For the caregiver, it is easy to apply and it gives the

patient a feeling of security. It is designed to provide upper-body support and is held in place by leg harness at the groin.

StandingVest is designed to activate the patient safely and comfortably.

SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for different

types of lifting and for patients with different needs. The slings are available in several different materials and in sizes from

XXS to XXL. All models are safe and very easy to use and are rated for lifting patients weighing up to 300 kg. The choice

of model and material depends on the patient's needs and the transfer situation.

Functional inspection

Visual and mechanical inspection

Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure that

seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the device

and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product must be

discarded.

Always read the manual

Always read the manuals for all assistive devices used during a transfer.

Keep the manual where it is accessible to users of the product.

Do not leave the patient unattended during a transfer situation.

To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the sling's

back loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.

The lowest allowable safe working load always determines the safe working load of the assembled system. Always

check the safe working loads for the lift and accessories before use. Contact your dealer if you have any questions.

Manual no: 00879 En Ver. 4 110912

Table of Contents

Need help?

Do you have a question about the StandingVest and is the answer not in the manual?

Page 1 Max load: 300kg/660lbs StandingVest is specially designed for lifting with a standing shell. For the caregiver, it is easy to apply and it gives the patient a feeling of security. It is designed to provide upper-body support and is held in place by leg harness at the groin.
Page 2 The lift vest is padded at arm height to prevent pressure and chafing. Placement of the StandingVest when the patient is lying down in a standing shell Place the RoMedic StandingVest under the standing shell, and then place the patient in the standing shell according to the standing shell instructions.
Page 3 The standing shell should be secured according to the standing shell i nstructions while the lift stabilizes the patient. When the patient is standing securely, the lift can be lowered and the StandingVest removed. SystemRoMedic M A N U A L...
Page 4 Material: Polyester: Durable material with low friction. Withstands high laundry temperatures. Care of the product: Do not use rinsing agent. To prolong product life, avoid Read the product label. tumble-drying. Size information Size XS/Orange S/Red M/Yellow L/Green XL/Purple Lift vests range inch Rec.