SystemRoMedic SupportStraps Manual

SupportStraps

SystemRoMedic

SupportStraps have been developed as an accessory for use with EasyBelt, FlexiBelt, ReadyBelt, ReTurnBelt and

FlexiMove. There are three different application areas for SupportStraps:

- Leg harness for EasyBelt/FlexiBelt/ReadyBelt

- Torso/side support when using QuickMove together with EasyBelt/FlexiBelt/ReadyBelt or FlexiMove

- Side support when using ReTurn together with ReTurnBelt

SystemRoMedic is a series of different models of transfer assistive devices. The choice of assistive devices depends on

the transfer situation and the patient's functional capability and needs.

Functional inspection

Visual inspection

Check the condition and function of the assistive device regularly. Always inspect the product after laundering. Check to

ensure that seams and material are free from damage. Check to ensure that fabric is not worn or faded. If there are signs

of wear, the product must be discarded.

Always read the manual

Always read the manuals for all assistive devices used during a transfer.

Keep the manual where it is accessible to users of the product.

Do not leave the patient unattended during a transfer situation.

Manual no: 00786 En Ver. 2 101119

Manual - English

Max: 150 kg (2x75kg)/

330.7 lbs (2x165.3 lbs)

Table of Contents

Need help?

Do you have a question about the SupportStraps and is the answer not in the manual?

Page 1 - Torso/side support when using QuickMove together with EasyBelt/FlexiBelt/ReadyBelt or FlexiMove - Side support when using ReTurn together with ReTurnBelt SystemRoMedic is a series of different models of transfer assistive devices. The choice of assistive devices depends on the transfer situation and the patient’s functional capability and needs.
Page 2 Loops Before use: - Always read and follow the instructions in the manual for the product with which SupportStraps are to be used. - Plan the lift and decide how many caregivers will be needed to assist to ensure safety.
Page 3 Read and follow the instruction in the manual for QuickMove. Remove the padded cases from the SupportStraps. EasyBelt/FlexiBelt/ReadyBelt: Fasten the SupportStraps around the handles on the QuickMove (recommended), alternatively on the appropriate handles on the sides/ towards the back of the belt.
Page 4 Material: Polyamide, nylon/polyester Care of the product: Do not use rinsing agent. To en- sure maximum material life, hang Read the product label. dry or tumble dry on low heat. P O Box 4791, Ferndown, Dorset BH22 9WB Tel: 07857 603031 Fax: 01202 877240 Contact your local distributor if you have any questions about the product and its use.