Yamaha Tenere 700 2024 Owner's Manual page 83

1
2
1. Drive chain guide
2. Distance A
Distance A:
43.0–48.0 mm (1.69–1.89 in)
5. If distance A is incorrect, adjust it
as follows. NOTICE: Improper
drive chain slack will overload
the engine as well as other vital
parts of the motorcycle and can
lead to chain slippage or break-
age. If distance A is more than
55.0 mm (2.16 in), the chain can
damage the frame, swingarm,
and other parts. To prevent this
from occurring, keep the drive
chain slack within the specified
limits.
[ECA23070]
Periodic maintenance and adjustment
To adjust the drive chain slack
Consult a Yamaha dealer before ad-
justing the drive chain slack.
1. Loosen the axle nut and the lock-
nut on each side of the swingarm.
1
1. Locknut
2. Axle nut
2. To tighten the drive chain, turn the
drive chain slack adjusting bolt on
each side of the swingarm in di-
rection (a). To loosen the drive
chain, turn the adjusting bolt on
each side of the swingarm in di-
rection (b), and then push the rear
wheel forward.
8-24
EAU74260
2
1. Drive chain slack adjusting bolt
TIP
Using the alignment marks on each
side of the swingarm, make sure that
both drive chain pullers are in the same
position for proper wheel alignment.
1
2
1. Drive chain puller
2. Position indicator
3. Alignment marks
1
(b)
(a)
8
3