Clutch Lever; Shift Pedal; Brake Lever - Yamaha Tenere 700 2024 Owner's Manual

Clutch lever

1
1. Clutch lever
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 7-3.)
EAU12823

Shift pedal

1
1. Shift pedal
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move
the shift pedal up. To shift the trans-
mission to a lower gear, move the shift
pedal down. (See page 7-3.)
5-16
Instrument and control functions
EAU12876

Brake lever

The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
3
1. Brake lever
2. Distance
3. Brake lever position adjusting dial
4. Match mark
The brake lever is equipped with a
brake lever position adjusting dial. To
adjust the distance between the brake
lever and the throttle grip, push the
brake lever away from the throttle grip
and rotate the adjusting dial. Make
sure the setting number on the adjust-
ing dial aligns with the match mark on
the brake lever.
EAU26827
1
2
4
5