Yamaha Tenere 700 2024 Owner's Manual page 46

Instrument and control functions
(b)
5
1. Spring preload adjusting knob
Spring preload setting:
Unit for adjustment:
Click
Minimum (soft):
0
Standard:
10
Maximum (hard):
24
TIP
 When turning the spring preload
adjuster in direction (b), the 0 click
position and the 1 click position
may be the same.
 When turning the spring preload
adjuster in direction (a), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
(a)
the suspension.
Rebound damping force
1
Turn the adjuster in direction (a) to in-
crease the rebound damping force.
Turn the adjuster in direction (b) to de-
crease the rebound damping force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
(b)
1. Rebound damping force adjusting screw
TIP
 When turning the damping force
 When turning the damping force
(a)
1
Compression damping force
Turn the adjuster in direction (a) to in-
crease the compression damping
force.
Turn the adjuster in direction (b) to de-
crease the compression damping
force.
5-25
Rebound damping setting:
Unit for adjustment:
Click
Minimum (soft):
23
Standard:
13
Maximum (hard):
0
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.
adjuster in direction (b), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
the suspension.