Brake Pedal; Abs - Yamaha Tenere 700 2024 Owner's Manual

Instrument and control functions

Brake pedal

5
1. Brake pedal
The brake pedal is located on the right
side of the motorcycle. To apply the
rear brake, press down on the brake
pedal.
EAU12944

ABS

The anti-lock brake system (ABS) acts
on the front and rear brakes indepen-
dently.
1
WARNING
Always keep a sufficient distance
from the vehicle ahead to match the
riding speed even with ABS.
 The ABS performs best with
long braking distances.
 On certain surfaces, such as
rough or gravel roads, the brak-
ing distance may be longer with
the ABS than without.
How to operate the brakes
Operate the brake lever and brake
pedal the same as you would conven-
tional brakes. If wheel slip is detected
while braking, ABS will activate and a
pulsating sensation may be felt at the
brake lever or brake pedal. Continue to
apply the brakes and let the ABS work.
Do not pump the brakes as this will re-
duce braking effectiveness.
 The ABS performs a self-check
EAU90662
EWA16051
 The brake system will revert to a
NOTICE
Be careful not to damage the wheel
sensor or wheel sensor rotor; other-
wise, improper performance of the
ABS will result.
1
2
1. Front wheel sensor
2. Front wheel sensor rotor
5-17
when you first start off. During this
time a clicking noise from the hy-
draulic unit may be audible, and if
the brake lever or brake pedal is
applied a vibration can be felt, but
this is not a malfunction.
conventional brake system in case
of ABS malfunction.
ECA20100