TE-8202A-W / TE-8202F-W series Fiber Optic Fusion Splicing Machine
Operation Manual
Main Features:
5 inches high resolution colorful LCD display, image can be
turned according to position
Average splice time: 10 second
Average tube-heat time: 30 second
Lithium battery: Rechargeable and up to 180 times of continuous
splice and heat after fully charged
Separately X or Y axis views with 500 times magnification and
Cutting-edge technology for image processing
New core alignment technology, the core alignment is more
accurate
New developed technology providing strong wind and dust
resistance
Working mode:Auto & Manual & Full-Auto
Micro USB Port
Storing 10,000 groups of latest splice results.
Storing 100 groups of splice images
Multipurpose optical fiber fixture ( 3-in-1 fixture and SC/LC/FC
connector fixture, patented technology)
Specifications:
Model no.
Applicable fiber
Average splice loss
Splice time
Suitable for cutting
optical fiber length
Suitable for optical fiber
core
Return lose
Fiber image
magnification
Tension test
Splice program
Electrode life
Protection sleeve length
Storage of splice result
Storage of splice image
Monitor
Communication port
Working lighting
Power indication
Operation condition
Standard plug
Power supply
Dimension(W x D x H)
Weight
Package:
1.
Machine x 1pc
2.
AC Adaptor x1pc
3.
Optical fiber splicing fixture (3-in-1)x1set
4.
Battery x1pc
5.
Spare electrodes x 1set
6.
Protection sleeve(60mm) x 25pcs
7.
Cooling tray x 1pc
8.
Operation manunal x 1pc
9.
Carrying belt x 1pc
10. Carrying case with carrying strap x 1pc
11. Disk (with communication program, driver and Instructions )
Please scan QR code or visit https://www.prokits.com.tw
for detail manual download
TE-8202A-W
TE-8202F-W
SM,MM,NZDS, EDF
0.02dB(SM),0.01dB(MM),
0.04dB(NZDS), 0.04dB(ED)
10s (SM)
10~16mm
Cladding diameter:80-150μm,
Coating diameter:100-1000μm
≧60dB
500 times for single X or Y view;
250 times for X and Y view
2.0N(200gf)(standard)
50 groups
6000 times
20mm~60mm
10000 groups of splice results
100 groups of splice images
5 "high resolution colorful LCD
Micro USB
1 LED light
4 LED indication
Temperature: -10~+50℃
Humidity:0~95%RH
Altitude: 0~5000m
A type
F type
Lithium battery: 10.95V/6Ah
Adapter: INPUT AC 100~240
50/60Hz; OUTPUT: DC15V/5A
155 x 145x 145mm
1.98Kgs (include battery)
1.6Kgs(not include battery)
TE-8202A-W
TE-8202F-W
Quick Reference Guide
The guide is for the basic operation. For the detailed information,
please refer to http: www.prokits.com.tw.
1.
Power Supply: Two ways of supplying power to the fusion
splicer: a. internal battery;b. AC power supply. Please turn off
fusion splicer before operation.
1.1. Insert battery: Insert the battery into the battery groove.
Make sure it is properly fixed.
1.2. Remove battery: Push the battery out
1-3. Using AC Adaptor : Put the plug into socket as matching
the anchor point.
2.
Turning on Splicer Power
Press power button
3. Setting Fiber in Splicer
3.1. Open the windproof cover ;
3.2. Open the left and right sheath
clamps;
3.3. Put the stripped fiber on the V-groove,
and make sure the fiber end between
groove edge and electrode (as pic).
3.4. Holding the fiber and close the sheath
clamps carefully. If the fiber is not properly set, please
adjust it;
3.5. Repeat the steps 3.3 and 3.4 for second fiber;
3.6. Close the windproof cover.
4. Splicing Operation
4.1. Mode: Manual /Auto / Full-auto
operation model in operation menu.
Manual: Fusion splicing operate step by step controlled
by the operator via the keypad.
Auto: Press the
core alignment and fusion splicing.
Full-auto: Automatically operation after closed the
windproof cover
4.2. Fiber type: SM/MM/NZDS/ED
5. Pause function :
5.1. Turn on the pause function: under auto and Full-auto
mode, after core to core aligning the fiber, splicing
machine will stop, then press
began to fuse.
Turn off: no effect any splicing mode operation.
6.
Take out the fiber and heat the fiber
1)Open the heater cover;
2)Open the windproof cover ;
3)Open the right and left sheath clamps;
4)Take out the fiber and move the fiber protection sleeve to
the splice point. Make sure the splice point in the center of
the fiber protection sleeve tube
5 ) Put the fiber protection sleeve on the heater, close the
heater cover;
6)Press
button, and red indicator light will light up;
7)When the indicator light off , it means that the heating is
finished;
8)Open the heater cover, check if there are air bubbles in
protection sleeve;
9)Put the fiber on the cooling tray, until it cooling down
PROKIT'S INDUSTRIES CO., LTD
https://www.prokits.com.tw
Email:
pk@mail.prokits.com.tw
©2023 Prokit's Industries Co., LTD. All rights reserved 2023001(C)
to switch ON/OFF device.
you can choose the
button, it will automatically core to
button, the splicer