Page 1
Charge/Discharge Circuit EM-8678A Light Bulbs, #14 GE mini-screw (3) EM-8627 (pack of 25)* *Order EM-8627 for replacement bulbs. See the PASCO catalog or web site at www.pasco.com for more information. Required Items Information AA* Batteries (2) PI-6601 (pack of 4)
Page 2
*See the PASCO web site at www.pasco.com. Product Description The EM-8678A Charge/Discharge Circuit can be used for the study of Ohm’s Law, battery and capacitor charge/discharge rates, or for various other experiments in electronics. The Charge/Discharge Circuit is included in the EX-9949 and EX-9953 Ohm’s Law Experiments.
Page 3
(such as the UI-5000 850 Universal Interface and UI-5400 PASCO Cap- stone). NOTE: If you use the PASCO Capstone software, you can also use the ScienceWorkshop CI-6503 Voltage Sensor and the ScienceWorkshop CI-6556 Current Sensor with either the UI-5100 850 Universal Interface or the CI-7650 750 ScienceWorkshop Interface.
Page 4
C h a r g e / D i s c h a r g e C i r c u it E q u i p m e n t S e t u p To Connect an External Power Supply to the Charge/Discharge Circuit •...
Page 5
Using the Data Acquisition Software • For example, in the PASCO Capstone software, click the “Hardware Setup” icon in the Tools palette to open the “Hardware Setup” panel. Confirm that the Voltage-Current Sensor icon appears with the interface’s icon. •...
Page 6
“EM-8678A” in the Search window. Limited Warranty For a description of the product warranty, see the PASCO catalog. Copyright The PASCO scientific Instruction Sheet is copyrighted with all rights reserved. Permission is granted to non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are used only in their laboratories and classrooms, and are not sold for profit.
Need help?
Do you have a question about the EM-8678A and is the answer not in the manual?
Questions and answers