Table of Contents
Advertisement
7 7 7 7 7
Disassembly procedures
Disassembly procedures for indoor unit
Operation procedures/pictures
8.1.1
Disassembling the front panel and
electric box cover
Unloose the clasps on both sides and lift the panel
upward. Unplug the two connecting terminals of the
display and slide out the rear clasp from the groove to
take off the front panel.(you can use panel support bar
to support the panel) Screw off the fixing screws of
the electric box cover and open the electric box top cover to take it off.
As shown in Fig.7-1
Filter
Push the filter up to unloose the clasp to pull out the
two filters.
8.1.2
As shown in Fig.7-2
Disassembling the guide louver
Bend the guide louver with strength and let out the
rotating shaft from the groove to take off the guide
louver. As shown in Fig.7-3
Panel panel sup-
Screw
port bar
Fig.7-1
Filters
Fig.7-2
Guide louver
Fig.7-3
Electric box
top cover
Advertisement
Table of Contents
