Elation SEVEN PAR 19IP User Manual page 15

MENU SUB MENU
Address
Set ADDR
Mode
No DMX
LCD.Set
Temp. C/F
Function DimCurve
Disp.Set
Gamma
Frequen
Defaults
Speed
Color
Program
Macros
Secondry
TimeInfo
Info
TempInfo
ModelInf
SoftWare
Err.Info
S Y S T E M M E N U
Supports Software Versions: ≥ 1.05
Features are subject to change without any prior written notice.
OPTIONS / VALUES
(Default Settings in BOLD)
001 ~ xxx
RGB 3CH, RGBSeven 3CH, 8bit 7CH, 16bit
14CH, Master 15CH, HSI 4CH, HSI Mast 10CH
Hold / Black / Program
On / Off
Display
Key Lock On / On1 / Off
Flash On / Off
On / Off
Inverse
F / C
Standard, Stage, TV, Architec, Theatre, Stage2
ADDR, Disp.CH
2.0, 2.2, 2.4, 2.8
900Hz, 1000Hz, 1100Hz, 1200Hz, 1300Hz,
1400Hz, 1500Hz, 2500Hz, 4000Hz, 5000Hz,
10Hz, 15Hz, 20Hz, 25Hz
Reset? / Cancel
1-99
Strobe 000-255
STATIC
R, G, B, RG, GB, RB, RGB, BLACK
CHANG15 Strobe 000-255
CHANG30 Strobe 000-255
FADE Strobe 000-255
0-63
OFF, SECONDRY
Current XXXX (Hours)
Total XXXX (Hours)
Last XXXX (Hours)
PIN= 050
PassWord
Clear Off / On
XXX F° / C°
Seven Par 19IP
≥ V1.05
Error Record 1 ~ Error Record 10
DESCRIPTION
DMX Address Setting
DMX Channel / User Mode
Function If NO DMX Detected
LCD Backlight Shut Off Time
LCD Buttons Key Lock (see page 13 for details)
Display flashes when NO DMX
Flips LCD Display 180 Degrees
Temperature Switch Between F˚/ C˚
Set Dimmer Curve Mode
Select Default Display
Set Gamma Brightness
Set LED Refresh Frequency
Restore Factory Settings
Set Program Speed from Slow (1) to Fast (99)
Select Static Color and Shutter/Strobe Value
Select 15 Color Program + Shutter/Strobe Value
Select 30 Color Program + Shutter/Strobe Value
Select Fade Color Program + Shutter/Strobe Value
Select Color Macro
Enable Secondary Mode
Fixture Run Time from Power ON
Fixture Total Run Time
Fixture Last Run Time
Enter PIN to Access Clear Last. Menu
Clear Fixture Last Run Time
Temperature in Fixture Head
Display Model Name
Software Versions (greater than or equal to)
Display 10 Recent Error Messages
15