Elation SEVEN PAR 19IP User Manual page 13

I N S T A L L A T I O N I N S T R U C T I O N S
CLAMP MOUNTING
This fixture includes an adjustable dual mounting yoke and safety cable rigging point
attached to the fixture (see the illustration below). When mounting this fixture to truss, be
sure to secure an appropriately rated clamp (not included) to the yoke using an M10 screw
and attach a SAFETY CABLE to the safety cable rigging point.
OVERHEAD RIGGING
Overhead rigging requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the fixture. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury and property damage.
POWER LINKING
USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE
POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX
POWER OUTPUT ON THIS FIXTURE. CHECK SILK SCREEN FOR AMX AMPS.
13
SAFETY CABLE
RIGGING POINT