Control Mode - Gree GUD24W2/D-D(U) Service Manual

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
2.1.2 Heating Mode

2.2 Control Mode

2.2.1 Based Control
2.2.1.1 Compressor Control
When cooling or heating mode is turned on, indoor fan will run for a while before the compressor starts.
Under different modes, the compressor can only be stopped after running for some time (special cases excluded).
This is to protect the compressor from frequent start or stop. Once the compressor is stopped, it must not be
restarted right away. Please wait for a few minutes.
7