Chrysler Pacifica 2020 Owner's Manual page 58

Head Restraints — Third Row
The outboard head restraints can be manually
folded forward for improved rearward visibility.
Pull the release strap to fold them forward.
Release Straps
NOTE:
The head restraints must be raised manually

when occupying the third row.
Do not fold if there are passengers seated in

the third row seats.
The head restraint in the center position can be
raised and lowered for tether routing or height
adjustment. Refer to "Occupant Restraint
Systems" in "Safety" for further information.
NOTE:
To remove the center head restraint, raise it as
far as it can go. Then, push the release button
and the adjustment button at the base of each
post while pulling the head restraint up. To rein-
stall the head restraint, put the head restraint
posts into the holes and push downward. Then,
using the adjustment button, adjust the head
restraint to the appropriate height.
Adjustment Button
WARNING!
ALL the head restraints MUST be reinstalled
in the vehicle to properly protect the
occupants. Follow the re-installation
instructions above prior to operating the
vehicle or occupying a seat.
GETTING TO KNOW YOUR VEHICLE
Power Folding Third Row Head Restraints — If
Equipped
For improved visibility, the third row outboard
head restraints can be folded using the
Uconnect System.
Press the "Controls" button located on the
bottom of the Uconnect display.
Press the Head Restraint Fold button
power fold the third row head restraints.
NOTE:
The head restraints can be folded downward

using the Head Restraint button or using the
manual release strap. The head restraints
must be raised manually when occupying the
third row.
Do not fold if there are passengers seated in

the third row seats.
55
2
to