Table of Contents
Advertisement
9
Connecting the Wire
Harness
No Parts Required
Procedure
Locate the wire harness under the machine frame and
connect it to the wire harness on the cab
Figure 19
Note:
Use cable ties to secure the wire harness into
place.
Important:
Do not secure the hoses to the hot or
moving parts.
10
Completing the Installation
No Parts Required
Procedure
1.
Add coolant to the machine; refer to the Service
Manual
2.
Check for leaks.
(Figure
19).
3.
Route the drain hoses through the R-clamps on
each side of the machine.
4.
Check for parts that interfere with moving parts
and make corrections before operating the
machine.
5.
Check the operation of all controls before
operating the machine.
6.
Use an assistant to adjust the rearview and side
mirrors before operating the machine.
7.
Remove the chocks from the wheels.
g031452
18
Advertisement
Table of Contents
