Installation - XCHARGE NZS Series Installation And Operation Manual

Package of metal basement is made with full PLYWOOD, showed in following picture.
3.2 Transportation
To transport the product in package, forklift must be prepared before transportation.
The lashing and securing method is suitable for transportation. For charger unit, at least two
binding belts must be through top of charger and fasten the product. For ESS, 4 binding belts
must pass through 4 rings to cross-fasten the ESS.
4.0
DANGER
Danger to life due to improper installation!
Failure to observe the ambient conditions can lead to dangerous situations when deal-
ing with electricity.
Do not install and use the charger near flammable, explosive, rough or combustible
materials or chemicals or steam.
14
Copyright | NZS Installation and Operation Manual
(Package of metal basement)

/ Installation